Software Development AI agent skills

13,359 skills in the archive. Read a skill’s instructions or open its original repository.

• Git Commit Push Pr

  by @devoxx

  Commit all changes, push to remote, and open a pull request in one go. Use when the user says "commit push pr", "ship it", "open a pr", or invokes /git-commit-push-pr.

• Wechat Claude Code

  by @Wechat-ggGitHub

  微信消息桥接 - 在微信中与 Claude Code 聊天。支持文字对话、图片识别、实时进度推送、斜杠命令。

• Supergoal

  by @robzilla1738

  Plan and autonomously build a software task end-to-end. Triggered by `/supergoal`, "plan and ship X", "supercharged plan", "autonomous build", "plan it out and don't stop until it's done", "I don't want to babysit this", or any…

• Subagents Orchestration Guide

  by @shinpr

  Guides subagent coordination through implementation workflows. Use when orchestrating multiple agents, managing workflow phases, or determining autonomous execution mode.

• Coding Principles

  by @shinpr

  Language-agnostic coding principles for maintainability, readability, and quality. Use when implementing features, refactoring code, or reviewing code quality.

• Ai Development Guide

  by @shinpr

  Applies language-agnostic and backend technical decision criteria, anti-pattern detection, debugging, and quality gates. Use when reviewing general/backend implementation choices, code smells, failures, or implementation…

• Frontend Ai Guide

  by @shinpr

  Applies React/TypeScript-specific technical decision criteria, anti-pattern detection, debugging, and frontend quality gates. Use when reviewing components, hooks, browser behavior, or frontend implementation completeness.

• Typescript Rules

  by @shinpr

  React/TypeScript frontend development rules including type safety, component design, state management, and error handling. Use when implementing React components, TypeScript code, or frontend features.

• Recipe Front Review

  by @shinpr

  Reviews completed frontend implementation for governing-source compliance, scope economy, repository quality, and security, then applies user-approved React corrections.

• Recipe Review

  by @shinpr

  Reviews completed implementation for governing-source compliance, scope economy, repository quality, and security, then applies user-approved corrections.

• Recipe Front Design

  by @shinpr

  Execute from repository evidence through applicable UI Spec and optional ADR decisions to complete frontend Design Doc approval

• Recipe Reverse Engineer

  by @shinpr

  Generate PRD and Design Docs from existing codebase through discovery, generation, verification, and review workflow

• Recipe Design

  by @shinpr

  Execute from codebase-scoped analysis through optional ADR decisions to complete Design Doc approval

• Recipe Front Adjust

  by @shinpr

  Adjust an already-implemented UI in-session with verification against the design source

• Recipe Fullstack Build

  by @shinpr

  Execute materialized fullstack task files with layer-aware agent routing

• Recipe Front Build

  by @shinpr

  Execute materialized frontend task files in autonomous execution mode

• Recipe Add Integration Tests

  by @shinpr

  Add integration/E2E tests to existing codebase using Design Docs

• Recipe Build

  by @shinpr

  Execute materialized task files in autonomous execution mode

• Web Test

  by @Nikolay-Shirokov

  Тестирование 1С через веб-клиент — автоматизация действий в браузере. Используй когда пользователь просит проверить, протестировать, автоматизировать действия в 1С через браузер

• Db Repo

  by @Nikolay-Shirokov

  Работа с хранилищем конфигурации 1С. Используй когда нужно захватить объекты, поместить изменения в хранилище конфигурации, получить изменения из него, подключить базу к хранилищу

• Epf Build

  by @Nikolay-Shirokov

  Собрать внешнюю обработку 1С (EPF/ERF) из XML-исходников. Используй когда пользователь просит собрать, скомпилировать обработку или получить EPF/ERF файл из исходников

• Db Cfe Admin

  by @Nikolay-Shirokov

  Управление расширениями конфигурации в информационной базе 1С. Используй когда нужно узнать какие расширения подключены к базе, выполнить проверку применимости или синтаксическую проверку, изменить безопасный режим или…

• V8 Xsd Fetch

  by @Nikolay-Shirokov

  Загрузка XSD-схем формата XML-выгрузки 1С по версиям формата в каталог проекта. Используй когда нужно скачать или обновить схемы платформы для проверки выгрузки по XSD, или узнать, какие версии схем доступны

• Db Load Dt

  by @Nikolay-Shirokov

  Загрузка информационной базы 1С из DT-файла — полная перезапись базы (конфигурация + данные). Используй когда нужно загрузить архив информационной базы, восстановить базу, загрузить dt

• Db Dump Dt

  by @Nikolay-Shirokov

  Выгрузка информационной базы 1С в DT-файл (вся база — конфигурация + данные). Используй когда нужно выгрузить информационную базу, выгрузить архив базы, сделать бэкап, выгрузить dt

• Epf Dump

  by @Nikolay-Shirokov

  Разобрать EPF-файл обработки 1С (EPF/ERF) в XML-исходники. Используй когда пользователь просит разобрать, декомпилировать обработку, получить исходники из EPF/ERF файла

• Web Publish

  by @Nikolay-Shirokov

  Публикация информационной базы 1С через Apache. Используй когда пользователь просит опубликовать базу, сервисы, настроить веб-доступ, веб-клиент, открыть в браузере

• Db Load Git

  by @Nikolay-Shirokov

  Загрузка изменений из Git в базу 1С. Используй когда нужно загрузить изменения из гита, обновить базу из репозитория, partial load из коммита

• Db Load Xml

  by @Nikolay-Shirokov

  Загрузка конфигурации 1С из XML-файлов. Используй когда нужно загрузить конфигурацию из файлов, XML, исходников, LoadConfigFromFiles

• Db Dump Cf

  by @Nikolay-Shirokov

  Выгрузка конфигурации 1С в CF-файл. Используй когда нужно выгрузить конфигурацию в CF, сохранить конфигурацию, сделать бэкап CF

• Db Dump Xml

  by @Nikolay-Shirokov

  Выгрузка конфигурации 1С в XML-файлы. Используй когда нужно выгрузить конфигурацию в файлы, XML, исходники, DumpConfigToFiles

• Db Load Cf

  by @Nikolay-Shirokov

  Загрузка конфигурации 1С из CF-файла. Используй когда нужно загрузить конфигурацию из CF, восстановить из бэкапа CF

• Db Run

  by @Nikolay-Shirokov

  Запуск 1С:Предприятие. Используй когда нужно запустить 1С, открыть базу, запустить предприятие

• Img Grid

  by @Nikolay-Shirokov

  Наложить пронумерованную сетку на изображение. Используй при анализе скриншота макета или печатной формы — измерить пропорции колонок перед генерацией табличного документа

• Erf Build

  by @Nikolay-Shirokov

  Собрать внешний отчёт 1С (ERF) из XML-исходников. Используй когда пользователь просит собрать, скомпилировать отчёт или получить ERF файл из исходников

• Erf Dump

  by @Nikolay-Shirokov

  Разобрать ERF-файл отчёта 1С в XML-исходники. Используй когда пользователь просит разобрать, декомпилировать отчёт, получить исходники из ERF файла

• Eve Lab Topology Build

  by @automateyournetwork

  Build or rewire EVE-NG lab topology. Use when creating or deleting virtual networks, connecting node interfaces to networks, inspecting topology links, checking interface mappings, or listing available node templates before…

• Computer Use Linux

  by @agent-sh

  Linux desktop observation and control via native Pi tools or the computer-use-linux MCP server: accessibility trees, screenshots, window targeting, and input synthesis (click, type, scroll).

• Eve Ng Console Ops

  by @automateyournetwork

  Execute live CLI commands on running EVE-NG nodes over telnet console. Use when running show commands, making live config changes, verifying protocol state, testing connectivity, checking console readiness, or interacting with…

• Blender 3d Viz

  by @automateyournetwork

  Create 3D network topology visualizations in Blender from CDP/LLDP neighbor data

• Catc Inventory

  by @automateyournetwork

  Catalyst Center device inventory and site management - list/filter devices by hostname, IP, platform, family, role, reachability; view site hierarchy; get interface details per device; device reachability monitoring;…

• Desktop Gui Inspect

  by @automateyournetwork

  Full-desktop automation for targets that have no browser and no API at all — a legacy Java-based NMS client, a vendor's Windows-only configuration utility, a terminal emulator with no scriptable interface. Drives OpenClaw's…

• Catc Troubleshoot

  by @automateyournetwork

  Catalyst Center troubleshooting workflows - device unreachable investigation, client connectivity issues, interface down analysis, site-wide outage triage, wireless roaming problems, integration with pyATS for CLI-level…

• Anta Validation

  by @automateyournetwork

  Validate Arista EOS network state against ANTA's pre-built 208-test catalogue, with structured pass/fail verdicts. Use for "is this switch healthy", "did my change break anything", "verify BGP/interfaces/hardware are correct",…

• Bgp Registry Intel

  by @automateyournetwork

  BGP and registry intelligence — RPKI origin validation (is this announcement authorised?), RDAP registry ownership and abuse contacts, PeeringDB interconnection data, RIPEstat routing status and prefix visibility, RIPE Atlas…

• Browser Viz Verify

  by @automateyournetwork

  Verifies that a NetClaw-generated visualization HTML file (three.js, canvas, drawio, UML, markmap) actually renders correctly — screenshot, console-error check, and an optional Lighthouse audit. Use immediately after generating…

• Catalyst Center Readonly

  by @automateyournetwork

  Query Cisco Catalyst Center read-only — device inventory, site hierarchy, wireless, assurance health, compliance, software images, events. All 514 read-only API operations reachable through 8 grouped dispatchers. Use when asked…

• Catc Client Ops

  by @automateyournetwork

  Catalyst Center client operations and monitoring - list/filter wired and wireless clients, detailed client lookup by MAC, client count analytics, time-based analysis, SSID and band filtering, wireless troubleshooting. Use when…

• Auvik Inventory

  by @automateyournetwork

  Auvik device, network, interface, and component inventory across MSP tenants — including entity notes, audit logs, and billing usage. Use when discovering what devices Auvik manages, listing networks or interfaces, checking…

• Auvik Lifecycle

  by @automateyournetwork

  Auvik device end-of-life posture, warranty/service coverage, and configuration backup history for refresh and renewal planning. Use when identifying devices past or approaching end-of-life, auditing warranty and service contract…

• Auvik Network Alerts

  by @automateyournetwork

  Surface and triage Auvik network alerts by severity, status, dismissed state, or time window across MSP tenants. Use when reviewing active alerts, investigating a specific device's alert history, filtering by severity…

• Fwrule Analyzer

  by @automateyournetwork

  Multi-vendor firewall rule analysis — overlap detection, shadowing, conflict identification, duplication checking across PAN-OS, ASA, FTD, IOS/IOS-XE, IOS-XR, Check Point, SRX, Junos, Nokia SR OS, and Fortinet FortiOS/FortiGate.…

• Cisco Psirt Advisories

  by @automateyournetwork

  Check whether a running Cisco software version is affected by a published PSIRT security advisory - by OS version, CVE, or advisory ID, with severity and CVSS. Covers IOS, IOS-XE, NX-OS, ASA, FTD, FMC and ACI. Use when asked if…

• Aap Automation

  by @automateyournetwork

  Red Hat Ansible Automation Platform — inventory management, job template execution, project SCM sync, ad-hoc commands, host management, Galaxy content discovery. Use when automating infrastructure with Ansible, running…

• Fmc Firewall Ops

  by @automateyournetwork

  Cisco Secure Firewall FMC — access policy search, rule inspection, FTD device targeting, multi-FMC profile management. Use when searching firewall rules by IP or FQDN, checking if host A can reach host B through the firewall,…

• Gait Session Tracking

  by @automateyournetwork

  GAIT session lifecycle management - branch creation, turn recording, audit logging for every NetClaw operation. Use when starting a new NetClaw session, recording a health check or config change, pinning a pre-change baseline,…

• Github Ops

  by @automateyournetwork

  GitHub repository operations — issues, PRs, code search, and config-as-code workflows. Use when creating a GitHub issue for a network finding, opening a pull request for a config change, searching repos for IP or VLAN…

• Arista Cvp

  by @automateyournetwork

  Arista CloudVision Portal (CVP) automation via REST API — device inventory, events, connectivity monitoring, tag management (4 tools). Use when managing Arista devices, checking CloudVision events, monitoring network…

• Aap Lint

  by @automateyournetwork

  ansible-lint playbook and role validation — syntax checking, best practice enforcement, project-wide analysis, rule filtering. Use when validating Ansible playbooks, checking code quality, or enforcing automation best practices…

• Aap Eda

  by @automateyournetwork

  Event-Driven Ansible (EDA) — activation lifecycle, rulebook management, decision environments, event stream monitoring. Use when managing event-driven automation triggers, enabling/disabling activations, or reviewing EDA…

• Cml Node Operations

  by @automateyournetwork

  CML node operations — start, stop, console access, CLI execution, config management, node details. Use when starting or stopping a CML node, running show commands on a lab router, setting startup configs, or reading console logs.

• Claroty Asset Inventory

  by @automateyournetwork

  Discover and classify OT / IoT / IoMT assets via Claroty xDome. List devices by site, Purdue level, and device purpose; assign Purdue layers and custom attributes; cross-reference with Nautobot / NetBox SoT to surface drift.

• Cml Lab Lifecycle

  by @automateyournetwork

  Cisco CML lab lifecycle management — create, start, stop, wipe, delete, clone, import/export labs. Use when building a network lab, starting or stopping a CML lab, cloning a topology, or importing lab YAML files.

• Equinix Network Edge

  by @automateyournetwork

  Search Equinix Network Edge virtual devices, available device types and metros, account/project scope and device ACL associations. Use for hosted Network Edge visibility, not device CLI configuration.

• Aruba Cx Config

  by @automateyournetwork

  View and manage Aruba CX switch configurations, perform ISSU upgrades, and firmware operations

• Devnet Catalyst Search

  by @automateyournetwork

  Search Cisco Catalyst Center API documentation for device management and policy automation

• Aruba Cx Interfaces

  by @automateyournetwork

  Monitor Aruba CX switch interface status, LLDP neighbors, and optical transceiver health

• Aruba Cx Switching

  by @automateyournetwork

  View and manage Aruba CX switch VLANs and MAC address tables for Layer 2 operations

• Aruba Cx System

  by @automateyournetwork

  Discover Aruba CX switch system information, firmware versions, and VSF topology

• Speckit Git Validate

  by @automateyournetwork

  Validate current branch follows feature branch naming conventions

• Speckit Git Feature

  by @automateyournetwork

  Create a feature branch with sequential or timestamp numbering

• Speckit Git Commit

  by @automateyournetwork

  Auto-commit changes after a Spec Kit command completes

• Speckit Git Initialize

  by @automateyournetwork

  Initialize a Git repository with an initial commit

• Speckit Git Remote

  by @automateyournetwork

  Detect Git remote URL for GitHub integration

• Build Dark Factory

  by @coleam00

  Take a PRD and build a dark factory around it - a repository that takes work in as an issue and ships validated code out with nobody at the keyboard - one component at a time, into the user's actual repo. Covers the five…

• Drive Screen

  by @coleam00

  Take real control of the desktop - list and focus windows, type, paste, click, scroll, and screenshot - on Windows, macOS or Linux, and drive other coding-agent sessions running in terminals. Use when asked to set up the screen…

• Skills Create

  by @coleam00

  Author a new Claude Code skill the house way, or refactor a fat skill into a lean SKILL.md + references/. Use when you want to "create a skill", "write a new skill", "turn a prompt or command into a skill", "split a skill into…

• Ablate Ai Layer

  by @coleam00

  Measure whether a repository's AI instructions still earn their place, by running the same real task many times with the layer intact and with it stripped, then grading every rule against what actually changed. Runs both arms…

• Macos Release

  by @fayazara

  Release a native macOS app to GitHub with DMG packaging and Sparkle appcast updates. Use this skill whenever the user wants to publish a new version, create a release, ship an update, push a release to GitHub, or update the…

• Macos Auto Update

  by @fayazara

  Add Sparkle auto-update support to a native macOS app. Use this skill whenever the user wants to add auto-updates, implement Sparkle, set up an appcast feed, add "Check for Updates" to their app, or integrate automatic update…

• Rules Create Global

  by @coleam00

  Set up your project's global rules, a lean and well-structured root CLAUDE.md (plus a starter .claude/), following the course methodology. Greenfield: pass your PRD and/or architecture-spec path and it derives rules from your…

• Second Brain Fix

  by @coleam00

  Work through the findings from a second-brain audit in batches, correcting stale facts and converting locations onto the state/event schema, driven by the markdown file of findings the audit left behind. Use after running…

• Opportunity Scan

  by @coleam00

  Scan how you actually work with your coding agent and surface what to encode next. Point it at ONE run's artifacts to find what would have prevented a specific failure (the reactive loop — 'that went wrong, what should change in…

• Worktree Merge

  by @coleam00

  Integrate any number of feature branches from parallel worktrees through one safe integration branch, validating after each merge and running the project's full check suite before touching the main line. Use when parallel…

• Rules Check Drift

  by @coleam00

  Check whether your rules file (CLAUDE.md or AGENTS.md) still matches the codebase after recent changes — run before a merge, or fold into your code-review pass. Reports stale/now-false rules, drifted architecture-map entries,…

• Piv Slice Epic

  by @coleam00

  Slice an epic (with its architecture decisions) into PIV-sized tickets with a dependency graph, then create them in your tracker (Jira via the Atlassian MCP, or GitHub/Linear/local). Accepts the epic and its architecture as one…

• Prime Backend

  by @coleam00

  Primes the agent with focused understanding of the backend portion of the codebase — API routes, services, data models, and database layer — without loading unrelated frontend code. Use at the start of a session when the work is…

• Piv Plan Implementation

  by @coleam00

  Creates a comprehensive, context-rich implementation plan through deep codebase analysis, a short clarifying interview, and external research. Accepts a tracker ticket (a Jira/Linear/GitHub key or URL, fetched from the tracker)…

• Prime Frontend

  by @coleam00

  Primes the agent with focused understanding of the frontend portion of the codebase — components, routing, state management, and styling — without loading unrelated backend code. Use at the start of a session when the work is…

• Prime Codebase

  by @coleam00

  Primes the agent with deep codebase understanding by analyzing structure, documentation, and key files. Use when starting work on a codebase, at the beginning of a session, or when you need a fast orientation before planning or…

• Setup Ai Tutor

  by @coleam00

  Sets up and starts the AI Tutor project locally (environment file, dependencies, database, migrations, and dev server). Use when standing up the AI Tutor for the first time on a new machine or after a fresh clone. This is…

• Piv Create Pr

  by @coleam00

  Push the current feature branch and open a pull request, ready for review. Use after a ticket's implementation is committed on its own branch — it detects the base branch, pushes, opens the PR with a clear body (summary · what…

• Piv Investigate Issue

  by @coleam00

  Investigate a GitHub issue — fan out parallel exploration, find the root cause (5 Whys, evidence-backed), and write a reviewable RCA artifact (then post a summary to the issue). The investigate step before piv-implement-issue.…

• Piv Fix Review Findings

  by @coleam00

  Triage code-review findings (manual or AI), fix the ones you choose one at a time with tests, defer/log the rest, then validate — and if the work is on a PR, commit and push so the PR reflects the fixes. Use after a review has…

• Piv Implement Issue

  by @coleam00

  Implement the fix for a GitHub issue from its RCA artifact (created by piv-investigate-issue) — drift-check the plan, branch, implement, add regression tests, and validate. Use after the investigation artifact exists and you're…

• Piv Validate

  by @coleam00

  Runs this project's full validation suite — tests, type checks, and linting across every part of the stack — then reports overall health. Use before committing, before opening a PR, or after finishing a chunk of work to confirm…

• System Evolution Review

  by @coleam00

  Performs a meta-level review of how well an implementation followed its plan, classifying divergences and recommending AI-Layer improvements. Use after an execution report exists to find bugs in the process, not the code.

• Piv Run Full Loop

  by @coleam00

  Autonomously develops a complete feature from priming through planning, execution, and commit by chaining the four core PIV-loop skills. Use when you want a full hands-off feature build from a single description.

• Piv Review Changes

  by @coleam00

  Performs a technical code review of recently changed files for bugs, security issues, and standards compliance, then writes a report. Use before committing, as a pre-commit quality gate.

• Piv Implement

  by @coleam00

  Executes an implementation plan task-by-task with validation at every step. Use when you have a completed feature plan and want to implement it in one pass.